Logistics

Rebuilding a warehouse network without stopping operations

A distribution warehouse loses scanner connectivity in the racking aisles, and cameras, office PCs and guest devices all share one flat network.

These scenarios are illustrative. They describe our standard approach and do not name clients or claim specific results.

The challenge

A distribution warehouse runs handheld scanners connected to its warehouse management system. Staff report that scanners disconnect in the high racking aisles, forcing them to walk back to the dock to sync. The network grew over several years: consumer-grade access points, unmanaged switches, and cameras, office PCs and guest phones all on one flat network.

Operations run six days a week, so any change has to avoid stopping picking and dispatch.

Our approach

1. WiFi site survey. We would measure signal and interference across the building, including inside the racking aisles where metal shelving and stock block radio signals. The result is a heat map and a placement plan for access points designed for high-density industrial environments.

2. Segment the network. Separate VLANs for scanners, cameras, office staff, management and guests, with firewall rules between them. A camera problem can no longer affect scanners, and guests never see internal systems.

3. Replace the core in stages. New managed switches and a MikroTik router are installed alongside the old equipment. Each segment is moved over during low-activity windows, with a tested rollback plan for every step.

4. Roaming tuned for scanners. Access points and SSIDs are configured so scanners roam between access points quickly while the operator walks the aisles.

5. Monitoring from day one. Switches, access points and the uplink are monitored, with alerts for offline devices and saturated links. Caddy Analytics shows WiFi health per zone so the warehouse team can spot problems before staff do.

What would be measured

Before deployment we would agree on targets such as coverage levels in every aisle, scanner disconnections per shift and time to detect an offline access point, then measure them before and after the change. This scenario describes our standard approach and does not name a client or claim results.

Talk to an engineer about your project

Tell us what you run today and what has to change. We reply within one business day with next steps, not a sales script.

Call usBook a consultation